E-mail This To A Friend

Video - Precision Welding Lathe

This video shows you the steps that a member of your manufacturing department would go through to make a circumferential weld. They are:

1. Load the part in the chuck.
2. Push the torch tower switch, which automatically moves the torch into place using air actuation.
3. On the GS2000 Gap Setter, select the arc gap distance in thousandths of an inch and push the start button. The GS2000 then sets the arc gap and tells the controller to start the weld program (gas on, start lathe rotation, strike arc, complete weld procedure, lathe rotation off, gas off).
4. After welding, the operator again pushes the torch tower switch to automatically move the torch away from the part (again using air actuation).
5. Unload the part from the chuck.

Once a successful weld procedure is established, the precision of the Pro-Fusion Lathe Welding system reduces the skill level required to repeatedly make high quality welds.

Streaming video with Microsoft Windows Media Player
		Get Windows Media Player here
Download and play with Real Player
		Get RealPlayer here

Click here to have a high resolution CD-ROM mailed to you with these videos on it.